ACHIEVE CHEM Supplies Rotary Evaporators and Glasswares for a Research Institute

The Federal Institute of Technology has made remarkable achievements in the research of rotary evaporator. The research team consists of senior researchers who are committed to solving various scientific problems and promoting the progress of evaporator technology.

In terms of scientific research results, the rotovap research team has published many highly cited papers in international peer-reviewed academic journals, which show their research results in the design, manufacture, performance optimization and application of evaporators in various application fields. Their research work not only increases our understanding of the physical phenomenon of lab rotary evaporator, but also improves the performance and reliability of chemical rotary evaporator.

In terms of scale, their rotavap research team has advanced laboratory facilities and equipment, which can meet various experimental needs. In addition, the team also has rich resources, including various software and hardware tools, as well as professional researchers and graduate students and other human resources.

In terms of researchers, the team consists of many professors and researchers with rich experience and profound professional knowledge in this field. They not only have a profound theoretical foundation, but also have rich practical experience, and can lead the team to solve various scientific research problems.

In terms of research topics, the rotary evaporator equipment research team is committed to solving various cutting-edge scientific problems, including but not limited to energy efficiency, performance optimization, material compatibility, environmental impact and use in various application fields. Their research topics cover a wide range of fields from basic research to applied research, aiming at promoting the innovation and development of  evaporator technology.

 

In a recent study, they needed the following equipment.

 

1. Use both 1L*100 and 2 L*100 flask in the same machine

2. Lifting method - manual

3. Temp. of chiller - commonly used , ice cold

4. A vacuum pump, chiller and cover along with evaporator. Include the model of the evaporator.

5. Evaporator will be used for smaller round bottom flask also. 100ml*100, 250ml*100 and 500 ml*100 round bottom flasks also. Have to include glass tube extender and manifold so that we can use smaller RBF in the same tank.

6. Two hundred pieces of reflux condenser, coiled and bulb types, 24/29 , about 30 to 45 mm long, to use in the heater mantle.

2L rotary evaporator: Rotary evaporator is a kind of equipment used to remove solvents or concentrate samples, which is often used in experiments such as chemical synthesis, separation and purification. 2L refers to the capacity of the rotary evaporator, that is, it can hold 2 liters of liquid at most. The rotary evaporator heats and evaporates the solution under vacuum by rotating the round-bottomed flask at the bottom of the bottle, thus realizing the rapid removal of the solvent and the concentration of the sample.

 

100ml,250ml and 500ml round-bottom flasks can be divided into one-mouth, two-mouth and three-mouth circles, which are suitable for different types of experimental reactions.

 

• Single-mouth round bottom flask: Single-mouth flask is usually used for basic chemical synthesis and reaction. It is suitable for conventional experimental operations such as solvent reaction, material mixing and dissolution. A single-mouth flask can be heated, stirred and temperature controlled through an interface.
• Two-necked round-bottomed flask: Two-necked flask is often used in experiments that require simultaneous feeding and exhausting, such as gas phase reaction or gas release experiment. One of the ports can be used for feeding or adding reaction substances, and the other port is used for exhausting generated gas or connecting to other devices, such as a condenser or a collecting bottle.
• Three-necked round-bottomed flask: A three-necked flask is usually used for experiments that require simultaneous feeding, venting and stirring. It is suitable for complex reaction systems, such as multi-step reaction, organic synthesis and gas-liquid phase reaction. Two of the ports can be used for feeding and exhausting, while the third port is used for stirring or controlling temperature.

Straight-mouth condenser tube: Straight-mouth condenser tube is the most common type, which has a straight pipe and is usually used for standard condensation operation.

• Simple structure and easy manufacture and use.
• The condensation effect is good, which is suitable for most general experimental needs.
• It can be easily connected and fixed with other equipment (such as flask, reaction kettle, etc.) through connectors.

 

Spherical condenser tube: The main feature of spherical condenser tube is that there is a spherical part at the end of straight condenser tube.

• Providing a larger condensation area is helpful to improve the condensation effect.
• It is suitable for experiments that need high condensation efficiency or deal with a large number of gases.
• The spherical part can provide an additional condensation path and reduce the backflow of droplets.

 

What kinds of rotary evaporator do you need? Email us at sales@achievechem.com